Genesis GV Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
My 2021 GV80 from the day I drove it off the lot, the car was drifting all over the road, had steering wander. New tires were installed and an alignment was done (supposedly the toe was out) and the car still has steering wander! Any suggestions!!! I also do not like the dark spot with the lights on at night. Difficult to get in and out of the vehicle. I have to contort my neck when getting in and I'm not a big guy.
 

· Premium Member
2021 Genesis GV80 3.5T AWD Advanced Plus
Joined
·
256 Posts
--My GV80 tracks straight as an arrow!
--Never noticed any dark spot.
--In settings, turn on the seat going all the way down & back--don't remember what they call it.
Don't forget to save your seat settings on the door.
 

· Registered
Joined
·
3 Posts
Dark spot is a federal mandate so that the lights do not shine in oncoming drivers. Looks like a notch when lights are on. As for the seat what I did was take the seat all the way back and down and set that using button #2. Button number 1 is set for my driving position. When I enter/exit car I hit button 2 .....no longer hitting top of my head
 

· Registered
Joined
·
231 Posts
My 2021 GV80 from the day I drove it off the lot, the car was drifting all over the road, had steering wander. New tires were installed and an alignment was done (supposedly the toe was out) and the car still has steering wander! Any suggestions!!! I also do not like the dark spot with the lights on at night. Difficult to get in and out of the vehicle. I have to contort my neck when getting in and I'm not a big guy.
Do you have the "easy access" set for on? It will move the seat back and down to the farthest position upon opening the door and once the door is closed it will put the seat back in the last used position.

It's Setup - Vehicle settings - seat - Seating Easy Access.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top